Another question...
I just had one more thing to add- I'm having trouble understanding, conceptually, why a strong acid-strong base combination makes a poor buffer system. When you compare titration curves of a strong HA/strong A- with strong HA/weak A- (or weak HA/strong A-), they look the similar to me...they both have areas before (and after, actually) the equivalence point where pH does not change rapidly, but only in the weak/strong combination is this considered a buffer range. Why is this? I think the answer has something to do with the purpose of a buffer (to neutralize added acid or base), but I'm having a hard time understanding how a strong acid-strong base combination fails to do this... Also, I found this flash web-page, and personally I find it helpful to visualize these sorts of things, thought you might want to pass it on to the rest of the class: http://www.mhhe.com/physsci/chemistry/essentialchemistry/flash/buffer12.swf
This really gets to the root of why and how a buffer works. Buffers control pH because there is a significant quantity of both the conjugate acid and conjugate base present in solution to react with added acid or base. Let's put some numbers on it to convince ourselves. Let's say we have a solution that contains 10,000 molecules of HA and 10,000 A- ions. If I throw 50 H+ ions into this solution, the ratio will be 10,050:9,050. It has changed, but it hasn't changed much so the pH of the solution remains nearly constant.
Now let's think about a strong acid solution. In that strong acid solution, the concentration of conjugate acid is effectively zero because strong acids (essentially) completely dissociate, so the ratio of HA to A- is more like 1:1,000,000 (or more). If you add a little OH- to this mixture, it's not going to react with HA because there's so little of it present. It will react with H3O+ that's floating around free in the water and the resulting solution will be influenced not by the HA/A- equilibrium, but by the H3O+/H2O/OH- equilibria present in water. This is the pH leveling effect of aqueous solution. It is possible to make solutions that have negative "pH" or "pH" above 14, but these are not regular aqueous solutions and the definition of "pH" has to be stretched a little bit to understand the acid/base character of these solutions. Convinced? Pull out your calculator and calculate the pH of a 6M aqueous solution of a strong acid. If we assume that 6M strong HA results in 6M H+ ions (or H3O+ ions if you prefer), the pH of that solution would be -0.78. What about a 1M solution? It would have a calculated pH of zero. In practice, these are not the measured pH's of these solutions because the ionization/autoionization of water kicks in and limits the observed pH.
Thanks for the web site, it's got a few other flash animations that might be helpful.
http://www.mhhe.com/physsci/chemistry/essentialchemistry/flash/flash.mhtml
2009-03-30
2009-03-28
Question...
An email question...
Qu: Is the pH of the first equivalence point of a polyprotic acid necessarily basic? And vice versa, is the pH of the first equivalence point of a polyprotic base necessarily basic? For example, in the winter 2006-exam 3 practice exam (#5), we are drawing a titration curve for the 1M potassium sulfite (kb=1.6*10^-7) with 1M HClO4. The answer key seems to show the first equivalence point being slightly acidic, but when I actually go through the calculations I find the pH at the first equivalence point to be 7.204 (I got that using an ICE table, with the assumption that at the 1st equiv point [k2SO3]=[KHSO3], if that is not correct could you go through the calculations?).
There may be a labelling problem here, so let me work through this. If the concentration of sulfite (conjugate base) and hydrogen sulfite (conjugate acid) are equal, this would be a buffer, it would not be at an equivalence point. {The potassium ion is a neutral spectator, so I'll leave it out...} When this titration reaches the equivalence point, all of the sulfite ion has been converted to hydrogen sulfite ion, so at that first equivalence point, this can be considered to be a solution of hydrogen sulfite ions. If you want to calculate a pH for this, you could use a table (not exactly an equilibrium table, but similar...), but let's try to talk through it instead.
Let's say that to start our titration we have V mL of 1M sulfite solution. To reach the first equivalence point, we have to add V mL of 1M perchloric acid, so the total volume of the mixture is 2V mL. (This is probably not strictly true, but it's a close enough assumption for our purposes here.) So if the initial concentration of sulfite ions was 1M, the concentration of hydrogen sulfite ions at the first equivalence point will be 0.5M. This means that at the first equivalence point, the pH of this mixture would be the same as an authentically-prepared 0.5M solution of HSO3-(aq). From the Kb given in the problem, we can calculate that Ka = 6.25x10-8 for HSO3-(aq). Now we should set up an equilibrium table for the reaction:
HSO3-(aq) + H2O(l) <=> H3O+(aq) + SO3-2(aq)
Go ahead, set it up on paper right now before you read the rest of this.
OK, what assumptions can we make to simplify this problem? Based upon its Ka, HSO3-(aq) is a weak acid, so it's probably safe to assume that "x" will be small compared to 0.5M. That means your math simplfies to:
6.25x10-8 = x2 / 0.5
Solving, x = 1.77x10-4 = [H3O+], so pH = 3.75. This may seem kind of low, but sulfurous acid is one of the strongest weak acids, so its titration curve should tend toward the acidic side. If you really wanted to analyze this titration and draw a super-accurate titration curve, you could also calculate the pH of the "half equivalence points". These are the points where [conj acid] = [conj base], so when you plug them into the Henderson-Hasselbalch equation they are the points where pH = pKa of the conjugate acid. For sulfite/hydrogen sulfite/sulfurous acid, these fall at pH = 7.2 and 1.9.
After all of that discussion, let's take a step back. For the exam problem mentioned, I was not expecting that anyone would calculate exact pH's of the equilivalence and half-equivalence points, I was more interested in qualitatively reasonable equivalence points. All of those calculations would have taken a lot of time and wouldn't have really resulted in "better" picture of the titration curve. In this case, sulfite ion is a weak base being titrated with a strong acid, so the solution should initially start out basic. The first equivalence point in this titration should be on the acidic side so as long as the first equivalence point was below 7, I was satisfied. Obviously, the second equivalence point should be at an even lower pH than the first, and it should take twice as much titrant to reach the second equivalence point. Some of the more common (and frustrating) errors in this question are that people don't always label their axes, or don't label them correctly, or titrate in the wrong direction.
Good luck with your preparation, and again, the exam will take place on the second class after we return. If you have questions before then, email me and I'll answer them to the blog.
Be safe.
Qu: Is the pH of the first equivalence point of a polyprotic acid necessarily basic? And vice versa, is the pH of the first equivalence point of a polyprotic base necessarily basic? For example, in the winter 2006-exam 3 practice exam (#5), we are drawing a titration curve for the 1M potassium sulfite (kb=1.6*10^-7) with 1M HClO4. The answer key seems to show the first equivalence point being slightly acidic, but when I actually go through the calculations I find the pH at the first equivalence point to be 7.204 (I got that using an ICE table, with the assumption that at the 1st equiv point [k2SO3]=[KHSO3], if that is not correct could you go through the calculations?).
There may be a labelling problem here, so let me work through this. If the concentration of sulfite (conjugate base) and hydrogen sulfite (conjugate acid) are equal, this would be a buffer, it would not be at an equivalence point. {The potassium ion is a neutral spectator, so I'll leave it out...} When this titration reaches the equivalence point, all of the sulfite ion has been converted to hydrogen sulfite ion, so at that first equivalence point, this can be considered to be a solution of hydrogen sulfite ions. If you want to calculate a pH for this, you could use a table (not exactly an equilibrium table, but similar...), but let's try to talk through it instead.
Let's say that to start our titration we have V mL of 1M sulfite solution. To reach the first equivalence point, we have to add V mL of 1M perchloric acid, so the total volume of the mixture is 2V mL. (This is probably not strictly true, but it's a close enough assumption for our purposes here.) So if the initial concentration of sulfite ions was 1M, the concentration of hydrogen sulfite ions at the first equivalence point will be 0.5M. This means that at the first equivalence point, the pH of this mixture would be the same as an authentically-prepared 0.5M solution of HSO3-(aq). From the Kb given in the problem, we can calculate that Ka = 6.25x10-8 for HSO3-(aq). Now we should set up an equilibrium table for the reaction:
HSO3-(aq) + H2O(l) <=> H3O+(aq) + SO3-2(aq)
Go ahead, set it up on paper right now before you read the rest of this.
OK, what assumptions can we make to simplify this problem? Based upon its Ka, HSO3-(aq) is a weak acid, so it's probably safe to assume that "x" will be small compared to 0.5M. That means your math simplfies to:
6.25x10-8 = x2 / 0.5
Solving, x = 1.77x10-4 = [H3O+], so pH = 3.75. This may seem kind of low, but sulfurous acid is one of the strongest weak acids, so its titration curve should tend toward the acidic side. If you really wanted to analyze this titration and draw a super-accurate titration curve, you could also calculate the pH of the "half equivalence points". These are the points where [conj acid] = [conj base], so when you plug them into the Henderson-Hasselbalch equation they are the points where pH = pKa of the conjugate acid. For sulfite/hydrogen sulfite/sulfurous acid, these fall at pH = 7.2 and 1.9.
After all of that discussion, let's take a step back. For the exam problem mentioned, I was not expecting that anyone would calculate exact pH's of the equilivalence and half-equivalence points, I was more interested in qualitatively reasonable equivalence points. All of those calculations would have taken a lot of time and wouldn't have really resulted in "better" picture of the titration curve. In this case, sulfite ion is a weak base being titrated with a strong acid, so the solution should initially start out basic. The first equivalence point in this titration should be on the acidic side so as long as the first equivalence point was below 7, I was satisfied. Obviously, the second equivalence point should be at an even lower pH than the first, and it should take twice as much titrant to reach the second equivalence point. Some of the more common (and frustrating) errors in this question are that people don't always label their axes, or don't label them correctly, or titrate in the wrong direction.
Good luck with your preparation, and again, the exam will take place on the second class after we return. If you have questions before then, email me and I'll answer them to the blog.
Be safe.
2009-03-27
Exam and Mastering Chemistry Update
I'm glad to hear (and see) that so many of you are contributing to the sandbagging efforts. Because of the flood-related delays, Exam 3 will take place on the second day after classes resume, with the first day devoted to review. At this point, it is expected that classes will resume on Monday, so we will review on Monday and the exam will be Wednesday. If classes get pushed back again, we'll adjust similarly. I have also pushed the deadlines on Master Chemistry Assignments 12 & 13 back to March 31st. Work on them as early as you can.
Be safe.
Be safe.
2009-03-25
One of these days it'll crest...
OK, see you all on Monday for the exam. I'll be back in town on Friday and will at least stop in my office. Email any questions and I'll answer to the blog.
Flood, flood and more flood...
With all the flood issues and canceled classes, I haven't bothered putting any updates on the blog. The only issue is with Chem 210L this week. Since the University has canceled Tuesday and Wednesday labs, we'll also cancel Thursday labs.
Help out with flood control in whatever way you can, I'll see you all on Friday.
Help out with flood control in whatever way you can, I'll see you all on Friday.
2009-03-20
New Mastering Chemistry...
There are two new Mastering Chemistry assignments posted:
Assignment 12 - Due 3/27 - mostly titrations and buffers
Assignment 13 - Due 3/29 - mostly solubility equilibria
Remember, we do not have class on Monday, 3/23, or Wednesday, 3/25, and Exam 3 has been pushed back to Monday, 3/30. I will be out of town until Thursday night, but I will be in email contact, send me any questions you have.
It looks like Fargo and Moorhead will be looking for volunteers to fill sandbags this week, if you have the time and ability to help out, here are a couple links to websites that might have info:
https://extranet.casscountynd.gov/Flooding/Pages/Volunteer.aspx
http://www.cityofmoorhead.com/flood/
http://www.inforum.com/
Have a good week, I'll see you all on Friday in class.
Assignment 12 - Due 3/27 - mostly titrations and buffers
Assignment 13 - Due 3/29 - mostly solubility equilibria
Remember, we do not have class on Monday, 3/23, or Wednesday, 3/25, and Exam 3 has been pushed back to Monday, 3/30. I will be out of town until Thursday night, but I will be in email contact, send me any questions you have.
It looks like Fargo and Moorhead will be looking for volunteers to fill sandbags this week, if you have the time and ability to help out, here are a couple links to websites that might have info:
https://extranet.casscountynd.gov/Flooding/Pages/Volunteer.aspx
http://www.cityofmoorhead.com/flood/
http://www.inforum.com/
Have a good week, I'll see you all on Friday in class.
2009-03-14
Solubility product constants
On Friday we looked at solubility product constants and how we can use Ksp to understand how salts dissolve in water. Don't forget, just like Ka and Kb and Kw, Ksp is just an equilibrium constant that refers to a specific reaction type. It follows all the same rules and trends as any other equilibrium constant.
I hope you all have a great break. There are a couple announcements regarding the next couple weeks:
1. I will be gone to the American Chemical Society's National Meeting and Exposition in Salt Lake City, UT, March 21-26, so my section of Chem 210 will not meet on Monday or Wednesday of the week after break. My Chem 210L section will meet on Tuesday at its regularly scheduled time.
2. Our next exam is scheduled for March 27th, the Friday after break. Since I will be out of town until Thursday evening, a few people expressed concern that they would have a difficult time preparing for the exam if I am out of town. Although I have the utmost faith that you would all be able to do a splendid job preparing in my absence, I can see that this might give rise to a little extra anxiety, so Exam 3 will move back a day to Monday, March 30th.
3. Although I will be out of town, I will be in email contact and I will be posting to the blog. Those posts will include answers to any questions I get via email as well as other info and sample problems. Check the blog for new content. If you have questions to email me, please include specific information. I won't have my textbook with me, so asking "How do I do #37 in Chapter 15?" will make it kind of difficult for me to give you a meaningful answer.
4. I will be setting up at least one (probably 2) Mastering Chemistry assignments for the week after break. I will have those assignments go "live" as soon as I organize them and will post a notice to the blog.
5. For those of you in my lab, I will post some info for you all as well. I'll probably try to post it on my web page with a notice on the blog, but it may end up here. I will have a few more graded assignments (including your last lab report) to be handed back in lab. At this point, Dr. Edvenson will be your lab instructor.
I'm sure I'll think of a few other things over the next couple days, I'll post any info that comes up.
I hope you all have a great break. There are a couple announcements regarding the next couple weeks:
1. I will be gone to the American Chemical Society's National Meeting and Exposition in Salt Lake City, UT, March 21-26, so my section of Chem 210 will not meet on Monday or Wednesday of the week after break. My Chem 210L section will meet on Tuesday at its regularly scheduled time.
2. Our next exam is scheduled for March 27th, the Friday after break. Since I will be out of town until Thursday evening, a few people expressed concern that they would have a difficult time preparing for the exam if I am out of town. Although I have the utmost faith that you would all be able to do a splendid job preparing in my absence, I can see that this might give rise to a little extra anxiety, so Exam 3 will move back a day to Monday, March 30th.
3. Although I will be out of town, I will be in email contact and I will be posting to the blog. Those posts will include answers to any questions I get via email as well as other info and sample problems. Check the blog for new content. If you have questions to email me, please include specific information. I won't have my textbook with me, so asking "How do I do #37 in Chapter 15?" will make it kind of difficult for me to give you a meaningful answer.
4. I will be setting up at least one (probably 2) Mastering Chemistry assignments for the week after break. I will have those assignments go "live" as soon as I organize them and will post a notice to the blog.
5. For those of you in my lab, I will post some info for you all as well. I'll probably try to post it on my web page with a notice on the blog, but it may end up here. I will have a few more graded assignments (including your last lab report) to be handed back in lab. At this point, Dr. Edvenson will be your lab instructor.
I'm sure I'll think of a few other things over the next couple days, I'll post any info that comes up.
2009-03-12
Additional aqueous equilibria....
Oops, looks like I missed a couple days. Sorry 'bout that.
So far this week, we have looked more closely at buffers. The key to most buffer problems is to try and wrestle the information you are given into the Henderson-Hasselbalch equation and solve for the bit of info that you're missing. The nitrite/nitrous acid buffer that we looked at in class also (sort of) demonstrated something called the common ion effect. We'll get more into common ion effects tomorrow.
Buffers let us control pH of a solution, but how do we determine concentration of an acid or base in solution? Titrations let us see how the pH of a solution changes as we add acid or base. We talked about titrations as stoichiometry problems in Gen Chem I, now we want to understand what's happening in a pH titration in a little more detail. This is easiest to do by looking at a pH titration curve. Using a titration curve, we can pick out regions where buffers are formed (that allows us to calculate the Ka of an acid), and equivalence points where the amount of acid and base added to the titration reflects the stoichiometry of a balanced reaction.
Don't forget about the Mastering Chemistry assignment, due tomorrow. For anyone who hasn't already heard, since labs were cancelled on Tuesday because of the lovely little snow storm, we have cancelled Chem 210L labs for the week. You will be doing the Titrations, Indicators and Buffers experiment the week after Spring Break.
So far this week, we have looked more closely at buffers. The key to most buffer problems is to try and wrestle the information you are given into the Henderson-Hasselbalch equation and solve for the bit of info that you're missing. The nitrite/nitrous acid buffer that we looked at in class also (sort of) demonstrated something called the common ion effect. We'll get more into common ion effects tomorrow.
Buffers let us control pH of a solution, but how do we determine concentration of an acid or base in solution? Titrations let us see how the pH of a solution changes as we add acid or base. We talked about titrations as stoichiometry problems in Gen Chem I, now we want to understand what's happening in a pH titration in a little more detail. This is easiest to do by looking at a pH titration curve. Using a titration curve, we can pick out regions where buffers are formed (that allows us to calculate the Ka of an acid), and equivalence points where the amount of acid and base added to the titration reflects the stoichiometry of a balanced reaction.
Don't forget about the Mastering Chemistry assignment, due tomorrow. For anyone who hasn't already heard, since labs were cancelled on Tuesday because of the lovely little snow storm, we have cancelled Chem 210L labs for the week. You will be doing the Titrations, Indicators and Buffers experiment the week after Spring Break.
2009-03-06
Chapter 15 to Chapter 16
Today we pretty much finished up Chapter 15 and started Chapter 16. If you didn't notice, it's because those two chapters are very very closely related to one another. We looked at an acid equilibrium problem and moved into buffers, we'll look more closely at buffers on Monday....
There's a new Mastering Chemistry assignment, due Tuesday. Don't forget about the MC assignment due on Sunday.
Have a good weekend...
There's a new Mastering Chemistry assignment, due Tuesday. Don't forget about the MC assignment due on Sunday.
Have a good weekend...
2009-03-04
Predicting acid strength
Today we looked at how the molecular structure of some acids can give us clues about their relative strength. We also briefly talked about how to treat sig figs when dealing with pH calculations. I also handed out a problem set for practice, if you didn't get one I'll post in on the class web page.
Hmm, not much else to say. 1st round playoff game tonight for the women's basketball team, 6pm tip. See you all Friday....
Hmm, not much else to say. 1st round playoff game tonight for the women's basketball team, 6pm tip. See you all Friday....
2009-03-02
Calculating pH of a solution
Today we combined the ideas of Ka (or Kb) with pH (or pOH) to predict the pH of an aqueous solution of acid or base. These are the same type of equilibrium problems we've been working with for the last couple weeks, they're just applied to a specific chemical situation. We can often simplify these problems by making some assumptions about the size of "x" compared to the initial or final concentrations.
There is a new Mastering Chemistry assignment posted, due Friday.
The MSUM women's basketball team is starting out the playoffs as the 3rd seed at home this Wednesday at 6pm against St. Cloud State.
There is a new Mastering Chemistry assignment posted, due Friday.
The MSUM women's basketball team is starting out the playoffs as the 3rd seed at home this Wednesday at 6pm against St. Cloud State.
Subscribe to:
Posts (Atom)